12V 110V 220V W1088 Dual Digital Thermostat Incubator Temperature Controller Thermoregulator 10A Heating Cooling Control
Features:
Heating or cooling control.Red and blue dual led display.
Independent Dual-way temperature controller;Temperature display resolution 0.1
Directly power output.
Support high(low) temperature alarm and support for power loss (the parameters of the sudden power failure are still valid
Application range is like home temperature control, farm, various cold storage, greenhouse, aquarium, etc
Specifications:
Display Type:Digital
Style:Standing Station
Temperature sensor: NTC 10K
Senor length:1.0m
Temperature measuring range: -55 ¡Æ C ~ 120 ¡Æ C
Resolution: 0.1 ¡Æ C
Accuracy:¡¾1¡Æ C
Power supply: 110-220VAC 50/60Hz, 12V DC , 24V DC(Please choose power supply when ordering)
Power consumption: <3W
Storage temperature: -30 ¡Æ C ~ 75 ¡Æ C
Relative humidity: 20% ~ 85% (No condensate)
Relay contact capacity: Two Relay Max 10A,Direct Output
Operation Instruction
-------------
Set startup temperature:
Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds,The required temperature can be set by the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
You can set different start temperature and stop temperature in controller 1 and controller 2
You can use controller 1 and 2 to control two independentsystems.
Output1 and Output 2 can be two independent heater/cooler.
Press "Up 1" Button & "Up 2"Button at the same time to setting mode
Code | Function | Set Range | Default |
P0 | Compressor 1 delay time | 0-60min | 0min |
P1 | Compressor 2 delay time | 0-60min | 0min |
P2 | High temperature alarm value | -55-120 ¡Æ C | 120 ¡Æ C |
P3 | Low temperature alarm value | -55-120 ¡Æ C | -55 ¡Æ C |
How to restore factory Settings
press the "Down 1" and "Down 2" button at the same time, the factory setting is restored
Temperature correction
Press ¡°Up 1 ¡±and ¡°Down 1 ¡±at the same times for 3 second. positive value = measured value + corrected value(group 2 temperature correction is the same method )
Note:
Heating Mode--Start temperature<Stop temperature
Cooling Mode--Start temperature>Stop temperature
Package Include:
1X Temperature Controller