No suspended ceiling, no slotting
0.55cm Ultra thin
Surface mounted magnetic track light
Q: For hardcover and second-hand houses, if you want to make "no main lights", do you want to have ceilings?
A:It used to be needed ! Now it doesn`t to be!
The suspended ceiling is the cornerstone of many non-main lighting products, and in the past, the height of the house was generally only about 2.8m.Not ceiling mounted is the best choice!
Who doesn`t want to wear a minimalist, cool, and versatile magnetic track light?
But...¡é
-To be slotted, to be embedded.
-Floor height is short, not beautiful.
-Easy to crack ,difficult to maintain.
-Fragile, unsafe.
Eight core advantages Speak with quality
1.Ultra-thin
The thickness of the track is only 5.5mm, and the installation effect is concealed
2.Convenience
No need for ceiling construction, just install the track directly
3.Smart
Joined Mijia Smart
4. Modular
Lamps can be arbitrarily changed position
5.Cutting
The track can be arbitrarily cut to the required length
6.Turning
The track splicing can be extended and turned arbitrarily, while supporting the turning of the ceiling and the wall
7.Patent
Seven patents cover protection to protect patent claims
8.Guarantee
This product has an insured amount of 5 million under the China People`s Property Insurance Co., Ltd.
only 0.55cm Ultra thin
Say goodbye to complexity and seriousness
Hidden in the invisible, showing the Minimalist style without main light
thinner than a cell phone
No ceiling required, saving time and money
Save at least 120RMB/§³ of ceiling installation fee
No ceiling required
No need for grooving
No need for ash
No suspended ceiling, no slotting
-Fix the bottom plate directly with screws
-Cover the cover plate
1.Track backplane
2.Decorative bezel
-Silicate board, gypsum board
-Concrete
-Wooden board
Strong magnetic adsorption + stable buckle
Double security is more intimate
Measured RA>90 high CRI
true color reproduction
Installation steps
1. Put the track back plate in the installation position for drilling and fixing.
There are screw fixing holes every 20cm on the backplane of the track.
In order to eliminate potential safety hazards, be sure to check whether all the screws are full and tightened.
2. The decorative strip is aligned with the card edge
Align one side of the decorative strip with the track card edge
3. Installation and fixation of decorative strips
-Place the decorative strip on the track card edge as the axis.
-Rotate 90 degrees to fully snap the trim into the track.
-Press the trim strip flat so that it is fully embedded in the track.
-It must be observed that the installation is in place.
4. Insert the track plug into the track end as shown
How to remove the decorative strip?
-Do not pry from one end of the track to prevent the decorative strip from being deformed by uneven force.
-Synchronize from one side with a pry tool
Pry out the trim strips evenly.