|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ðµ¨ ¹øÈ£: RCWL-0516
- Á¶°Ç: »õ·Î¿î
- À¯Çü: Radar sensor switch module
- ¿ø»êÁö: Áß±¹
RCWL-0516 microwave radar sensor switch module human sensor module intelligent sensor detector sensing distance of about 5-7 meters
i. Features:
1,Using special signal processing control chip RCWL-9196 2,Wide working voltage van 4.0~28.0V compared with traditional infrared sensing PIR, with penetration detection capability 3, blocking time, distance adjustable 4, can output 3.3V power supply ii. Pin Function Description: 1: 3V33.3V output voltage, drive current 100mA. 2: GND module ground. 3: 0UT Control signal output, when there is an object moving in the detection area, OUT output high level, C-TM can set repeat trigger time, if there is a trigger signal (there is an object moving) within the repeat trigger time, continuous output high level, if there is no moving object in the detection area, output low level. 4:VIN Module power input, 4-28V. CDS5: Trigger control signal; less than 0.7V, OUT has been output low level, greater than 0.7V, the detection works normally. CDS pin external photoresistor, you can turn off the module detection function at night.
iii. Application design should pay attention to:
1,The induction surface should not have any metal blocking directly in front of it.
2 ,
The front and rear of the induction surface should be reserved more than 1CM space.
3, the module and the installation carrier plane as far as possible to hold parallel.
4 certain detection area within the application is effective.
The module has components for the positive induction surface, the reverse side for the negative induction surface. Negative induction surface induction effect is slightly worse.
5, microwave modules can not be applied in the same area on a large scale, otherwise there will be mutual interference, the distance between a single body is greater than 1M or more.
iiii,Line Diagram:
|
|
|
|
|