Feature:
1. Alarm Function: The security password has a vibration alarm triggering device. Once someone moves the car, it will trigger this device and make alarm sound to achieve the effect of anti theft.
2. Password Type Lock: The bicycle security password alarm through the password to implement alarm control and alarm removal, simple operation, and it provides better guarantees for the safety of bicycles.
3. Adjustable Sensitivity: The vibration of this bicycle lock trigger sensitivity is divided into three gears, and each gear can be replaced by yourself, you can set a new password that is difficult to solve.
4. Low Voltage Warning: When the battery voltage is low, a prompt sound will remind you to replace the battery in time to prevent it from suddenly gone when you go out.
5. Usage: The bicycle security password alarm is used for bicycles, motorcycles, electric vehicles or other fixed asset (door, cabinet, combination box, etc.) protection.
Specification:
Item Type: Bicycle Security Password Alarm
Material: ABS
Applicable Models:
For protecting bicycles, motorcycles, electrocar or other
fixed asset (door, cabinet, combination box, etc.)
Volume: 105db
Battery Type: 1x9V 6F22 ( Battery not included )
Opening Width: 30mm/1.18in
How to Use:
1. Factory setting password: ABCA
2. Password modification: Long press the A key for 2 seconds ("di" once), enter the old password (correct the sound correctly, the error prompts the sound and exit the operation), and enter the new four digit password (successfully prompting two sounds). Note: When the battery is removed, the password is restored to the factory to set the password.
3. When entering the error password four consecutive times, the system locks the keyboard to prohibit operation, and it can be lifted after 3 minutes.
4. Deployment: Long press the B key for 2 seconds, the host prompts the sound "di", the deployment is organized successfully, and the alert state after a delay of 5 seconds.
5. Remove: In the state of deployment or alarm, enter the four digit password, prompt the sound "di" twice, and exit the deployment.
6. Under the deployment state, the host was triggered by the vibration and the alarm for the first time, and it raised 5 continuously. If it was triggered again in 5 seconds, the host will continue to sing for 15 seconds.
7. Low voltage detection: When the battery voltage is low, the host prompts "di" every 1 minute, indicating that the battery needs to be replaced.
8. Sensitivity adjustment: Vibration triggers sensitivity can be divided into three gear adjustments (the highest one, moderate in the second gear, and the lowest in the third gear). When the statement is lifted, press the C key to hear the "di", and then listen to it after 2 seconds to the ¡°di¡± sound, it means that the settings are set to a gear; press the C key to hear the "di", and then hear "di" twice after 2 seconds, indicating that the settings are set to the second gear; The three sounds of "di di di" (cycle operation). Note: The factory defaults to the second gear.
You can install it on the steel pipe under the seat, or you can choose other places you like or suitable for installation.
Package List:
1 x
Bicycle Security Password Alarm
1 x Fixator