Ç÷¹À̽º Ȧ´õ
Here the package contain 1 control board and 1 fingerprint sensor.
Suitable for DIY multiple smart equipment, home/car automation, smart lock, access control system and so on.
Item feature of control board
Technical parameter of control board
Fingerprint capacity: 120
Power supply: 4*AA battery or DC5V
Stand-by mode current: less than 7 uA
Output£ºDC5--6V,500mA
Instructions for control board£º
1.Press SET button shortly,system in administrator register status and blue indicator light flash fast, place your finger in the collection area, fingerprint register successfully when hearing music.Fingerprint can be registered continuously,and it can register 20 pieces administrator fingerprint. If no need for adding fingerprint, waiting for 6 seconds or press the SET button to exit.
2.When back to factory default, press SET button until hear ¡°Di-Di-Di¡± beep and release the button,means initialization operation successful.
3.Register User Fingerprint: Press the administrator fingerprint until hear the music and blue indicator light flash fast, means can add user fingerprint. Place the user finger in the collection area,fingerprint register successful when hearing music. Fingerprint can be registered continuously, it can register 100 pieces user fingerprint.
4.Delete User Fingerprint: Press the administrator fingerprint,after passed, you can see the blue indicator light flash fast and hear the music, move the finger until the red indicator light flash and hear ¡°DiDiDi¡± long deep, then all user fingerprints are deleted.
5.Mode selection,setby the toggle switch:
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 5 second
c) 1:OFF, 2:ON Output DC5V and keep 1 seconds
d) 1:OFF, 2:OFF Keeping output DC5V until removing the finger
6.OPEN(P3):
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 5 second
c) 1:OFF, 2:ON Output DC5V and keep 1 seconds
d) 1:OFF, 2:OFF No Output
Note:
1. When the voltage is less than DC4.7V, the red light lightens, means the low voltage warning.
2. In the ¡°D¡± mode,when need to register user fingerprint,after press the administrator fingerprint successfully,lifting the finger then press the same administrator finger again until hear the music and blue indicator light flash fast,then it can register user fingerprint.