XCAN Hex Shank Countersink Drill Bit 6-19mm Set Titanium Coated 5 Flute Hole Drill 90 Degrees Wood Chamfering Cutter
Features:
1. These flute countersink drill bit set are machined from high speed steels and are available in 6 different diameter sizes. Size - 6mm(1/4``), 8mm(5/16``), 9mm(3/8``), 12mm(1/2``), 16mm(5/8``), 19mm(3/4``)
2. 90° angle on the point for sharp and precise countersinking. The cutting edge is hardened and honed for sharpness. A Chatter-Free,five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting
3. Ideal for wooden planks,fiberboard,particle board,plywood,plastic,alumiumn board ,pcb board and more
4. Great for Sinking 90 Degree Holes into Wood and Soft Metals Countersunk Screws and Fixings.Suitable for DIY, Home and General Building/Engineering Using
5. 1/4¡È hex shank countersinks are fine for a quick drill. They don¡¯t slip in drill chucks. You can make deep countersinks easily by setting the countersink¡¯s depth stop to allow the countersink to drill more deeply into the worksurface
Specification:
Type: Countersink Drill Bit
Material: High Speed Steel
Coating: Titanium Coated
Shank: 1/4``(6.35mm)
Size: 6mm 8mm 9mm 12mm 16mm 19mm
Center Punch Length: 130mm
Note |
Please allow 1-3mm error due to manual measurement. |
Due to the difference between different monitors, the picture may not reflect the actual color of the item. |
|
Package Including: |
1Set Drill Bit |