Aubess Tuya Smart Wifi CO Detection Alarm Fire Carbon Monoxide Sensor Fire Protection Home Security Protection Alarm Equipment
Description:
This device is a battery- powered Tuya WIFi app control carbon monoxide alarm with an advanced electrochemical sensor for domestic use. Please note that this device does not detect smoke, heat, flames or other hazardous gases.
Network access settings
Open the `Tuya Smart" or "Smart Home" App, select the "Smart Home"page, and click the " Add Device" button;
On the device addition page, click the "Scan" button in the upper right
corner to scan the QR code below;
Follow the instruction step by step to complete the paring process.
You can choice to paring the network by manual operation al next step:
Paring process(EZ Mode):
Step1: Open the APP enter into "My Home" ,click "Add Device" ;
Step2: Select "Security & Sensor",and select "Alam (Wi-FiI";
Step3: Power o the device, Quickly press the button four times until
the LED indicator light rapidly blinks.Confrm and Click"Next"
Step4: Wait for the device to configure automatically.The paring
process is within 3 minutes ;
Step5: After the configuration is successful, the indicator light stops
blinking, and the APP jumps to "Added sucessfully". Click "Done" to
finish the paring process.
IF failed to pairing the alarm, please try again or choose the AP Mode
to try it.
This product uses a low power consumption module with builtin Wi-Fi connectivity solution designed by Hangzhou Tuya Technology Corporation, which can connect the product to the Tuya cloud platform.
When the product detected the CO con, it can automatically push the
fire alarm information to `Tuya Smart APP`, reminds users to protect your lives and property.
Power Supply £º9V battery
Sensor Type: Electrochemical
Safety Standard: Conforms with EN50291:2010
CO Sensitivity:50ppm: 60~90 minutes
100ppm: 10-40 minutes
300ppm: <3 minutes
Standby Current :<25 uA(average)
Working Current : <50 mA(average)
Temperature : 4¡É~40¡É
Humidity :10%~95% RH(no n-condensing)
Alarm Sound:> =85 dB at 3M
Alarm Silence: About 6 minutes
Specifications:
Introduction
This device is a battery-powered Tuya WIFi app control carbon monoxide alarm with an advanced electrochemical sensor for domestic use. Please note that this device does not detect smoke, heat, flames or other hazardous gases.
1. Preheat After the alarm is powered on, the alarm will enter the warm-up state for 1
minute; the green and yellow LEDs will flash, at the same time, the LCD will cyclic display numbers 1¢¦9, and the LCD will display 0 at the end of thewarm-up, indicating that the alarm has entered the normal working state;
2. Testing Test your alarm by pressing the Test/Hush button until the unit beeps once and the red LED flashes once, then release the test button. The blue backlight will be lit, and the unit will proceed to beep 4 times with the red LED flashing 4 times.
After 5 seconds of silence, the unit will beep 4 times with the red LED flashing 4 times again. It is then followed by a single beep and the red LED flashing once.
The LCD display will show the highest CO value recorded since the previous test, followed by "---"then "PAS"and finally "0".
3. Hush button When the CO detector is sounding an alarm after a suspected false alarm, you can press the Test/Hush button and the detector`s alarm sound will beep intermittently, the blue backlight will be off and the red LED will flash once every 5 seconds. The detector will resume its normal monitoring status after 5-15 minutes. If the CO level is still at a dangerous level, the alarm will sound again.
4. CO alarm levels The CO01A Battery-Operated Carbon Monoxide Alarm is programmed to sound an alarm at the following CO concentrations within the time periods listed:
50 ppm for 60-90minutes,
100 ppm for 10-40 minutes, and 300 ppm for 0-3 minutes.
When CO is detected and the alarm sounds, the CO concentration will be displayed on the LCD and a blue backlight will be lit. The red LED will flash and the alarm will issue 4 short beeps, repeating the cycle every 5 seconds.
Package Included:
sensor*1
Manual *1
Notes:
Without battery
![](https://ae01.alicdn.com/kf/Sf72f5f528be540d6bd5c94989a29d7baz.jpg)
![](https://ae01.alicdn.com/kf/Sbe7092839afd42cfb1a195ae1432deb3L.jpg)
![](https://ae01.alicdn.com/kf/S058718f4d6ec464697ea237cdee4c946S.jpg)
![](https://ae01.alicdn.com/kf/Sb48ae90aa7894465832163949e2f7e32o.jpg)
![](https://ae01.alicdn.com/kf/S7a09f4970f4d46e3994e94b0056b4953q.jpg)
![](https://ae01.alicdn.com/kf/S80837d0535384189b54eda0e8223c107x.jpg)
![](https://ae01.alicdn.com/kf/Sb06f81aede4540db81b21b2e115be882Z.jpg)
![](https://ae01.alicdn.com/kf/Sb87638da7e24493ea4e2e0fedea758e8j.jpg)
![](https://ae01.alicdn.com/kf/Se07b2232df4d4c5fb4ee13f2531e5f17S.jpg)
![](https://ae01.alicdn.com/kf/Se8e358f73e8e4f5a831eff1d77b491d4n.jpg)
![](https://ae01.alicdn.com/kf/S3e9da05783f74c63a1a55f70f40a07cdJ.jpg)
![](https://ae01.alicdn.com/kf/Sff26e037cd7c4593a8f5568d235872b4G.jpg)