|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: LSZ
- ±Ù¿ø: CN (Á¤Ç°)
- ¸ðµ¨ ¹øÈ£: LSZ-AW072-Q214
- Áõ¸í¼: ¼¼·ý,FCC,ROHS
- POWER ON: 2S Max
- Latency: 120mS Max
- Screen type: TFT-LCD
- Video Codec: AVI
- Video in System: PAL/NTSC
- Function: Waterproof
- car Make: Universal
- Current Consumpti: 300mA, Max.380mA
AW072 is a 720P digital audio video receiver with 4T1R, the main application is wireless car rear vision, wireless monitoring, which integrates MPEG4 codec , FHSS base band , RF transceiver ,AD&Flash, and CCIR656 Sensor,Support CVBS PAL/NTSC System input.
Baseband digital specifications POWER ON£º2S Max. Latency £º120mS Max. Resolution£º VGA 640X480/D1£º720X480 Frame Rate£ºVGA30f/s/D1: 25f/s Video Codec£ºAVI Video in System£ºPAL/NTSC Voice Sample Rate£º16KHz/12BIT ADC ADPCM/PCM Voice Frequecny Band£º 20Hz~20KHz ID/ BIT£º £¨Pairing£©/22(4KK) SYSTEM Architecture£º RISC(32Bit)
item | value | Function | Waterproof | Product name | 7 inch digital wireless monitor kit | Power Supply | +9~+30V | Voltage Standing Wave Ratio | 2:1 | Operating humidity | 85%RH | Storing Temperature | -30~+85 | car Make | Universal | Operating Tempera | -10~+60 | Current Consumpti | 300mA, Max.380mA | Multi-language | English, Japanese, Russian, Spanish, Italian, German, French |
1.Code-matching operation: after power on, press the menu key to enter the main menu and select the code-matching Enter code matching mode and count down the code in 20 seconds. At the same time, the transmitting side is in the strong state of the code to match the code.
2.Image setting : Adjustable in the image menu, brightness, contrast, chroma, volume adjustment.
3. Mirror settings:
The mirror menu controls the image up, down, left, and right flip functions.
4¡¢Mode setting 5. Camera settings£º under this menu, you can select the switch status, cycle time, and set automatic cycle of the four cameras.
6. System setting£º In the system setting menu, you can adjust the date and time, language, N system/P system, trigger the time, reverse cursor function¡£
7. Play function£º select play function to enter play interface, play SD card content, press menu key to exit.
8. Video setting £º Enter the video setting interface, you can format SD card and loop recording function. Note: The first use of the new card must be formatted in this machine before it can be used normally.
|
|
|
|
|