Features:
1. LCD screen display
2. Easy operation interface
3. PWM charging mode + MPPT
4. Parameter user can reset
5. A key to open and close the load
6. A key to restore the factory settings
7. Battery reverse discharge protection
8. Battery reverse polarity protection
9. Battery under voltage protection
10. Overload, short-circuit protection
11. Automatic temperature compensation function
12. Can charge and discharge at the same time, Always keep the battery in full status
Specification:
Model: MPPT L-80
Maximum current: 80A
Installation wire diameter (mm2): 20mm2
Mounting wire (AWG): 2#(AWG)
Peak power of solar panels (maximum Wp): 1000W
Battery capacity configuration: 800AH
Size: 21*14*7.5cm
Battery float voltage: 13.8V (12V system) / 27.6V (24V system)
Battery (undervoltage) protection: 10.6V (12V system) / 21.2V (24V system)
Battery (undervoltage) recovery voltage: 10.6V (12V system) / 25.2V (24V system)
System load loss: 13mA
Loop Buck: 100mV
Working temperature: -10 ¡Æ C ~ + 60 ¡Æ C
Storage temperature: -30 ¡Æ C ~ + 70 ¡Æ C
Working temperature: 90%, no condensation
Temperature compensation: -4mV / Cell / ¡ÆC
The maximum open circuit voltage of solar panels: 18V~24V (12V system) 36V~48V (24V system)
Maximum open circuit voltage of solar panels: 48V
Packing included:
1 x Solar Controller
Note:
1. Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item.