|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- À¯Çü: ¼ö°ø±¸ ºÎÇ°
- ±Ù¿ø: CN (Á¤Ç°)
¿É¼ÇÁ¤º¸[(200026864)GY-Openlog]![](https://ae01.alicdn.com/kf/Sa833d1220ead44318c884480e26ea1f1p/Gy-openlog-cleanflight-naze32-F3-blackbox-black-box-flash-recorder.jpg_640x640.jpg)
modname=ckeditor
This product is a data recorder, which can record data on the memory card through UART universal serial port. This function is similar to the black box to record the data sent by the main device to the serial port, and save the data in the form of text on the memory card. This product can be used for the flight control board with cleanflight firmware, which is connected to the corresponding serial port. Through the setting of the upper computer software cleanflight configurator, the important operation data of the UAV can be recorded on the memory card. And playback and analyze the flight records through blackbox flight data recorder software. Note: after the memory card is inserted and powered on for the first time, the memory card will produce config Txt file, which includes the baud rate parameter of the serial port. This parameter can be modified. Please keep the baud rate of the serial port of the flight control or the main circuit consistent with the baud rate of the recorder. Parameters: Input voltage 3.3v~12v (recommended 3.3v~5v) The memory format is FAT32, supporting a maximum of 64GB memory UART serial interface Baud rate adjustable The default bootloader is pro Mini atmega328p 5V 16mhz Technical parameters: 1. Support to store to fat16/fat32 format TF card, and the storage capacity can reach 32g 2 with simple command line interface 3. Change the config file in the TF card on the computer (if it is a new card, the config file will be automatically created after the card is inserted and powered on for the first time), and then change the settings, such as baud rate. You don`t need to buy any special tools to change the serial port settings to use your needs. 4 three modes: new, add, command 5 baud rate support 2400, 4800, 9600, 19200, 38400, 57600, and 115200 6. Ensure that the minimum connection for operation is VCC, GND, Rx 7 two LED lights indicate the operation status 8. The input voltage is 3.3V to 12V, preferably 3.3 to 5V. 9. The idle current is 2mA, and the maximum recording rate is 6mA.
|
|
|
|
|