Wireless RF 433Mhz Smart Switch Wall Panel Switch With Remote Control AC90V~250V Mini Relay Receiver For LED Light Lamp Fan
If you don`t know how the product works
Please go to the bottom of the link to check the description
Description:
Product parameters:
Working voltage: AC 90-250V 50/60Hz
Load current: ¡Â10A, load power: 1100W
Standby current: 3.6mA¢¦5mA
RF frequency: 433MHz
RF working mode: superheterodyne reception
Receive sensitivity: >97dbm
Remote control receiving distance: more than 50 meters in open space
Decoding method: MCU software decoding;
Modulation method: ASK (anti-interference, strong transmission performance)
The number of remote controllers that can be stored: 20
Support remote control type: intelligent learning type 1527 learning code, 2262 fixed code (customizable rolling code);
Output type: 1-way relay switch signal, with load current less than 10A;
A variety of working modes: jog, self-locking, interlocking, delay off (5 seconds, 10 seconds, 15 seconds, 20 seconds optional), light-on function when incoming calls;
Working environment: -20¢¦80¡É.
Color: black, white
Wiring method: fixed terminal
Output wiring type: neutral wire, live wire
Specifications:
About Working mode:
[Jog mode]Press the remote control and do not release the line to power on, release the remote control line to disconnect;
[Self-locking mode]Press the remote control line to power on, and press the remote control again to disconnect the line;
[Interlock mode]Press one of the buttons on the remote control (such as the A button), the line is powered on, and then press another button on the remote control (such as the B button) to disconnect;
[Jog delay off mode]Press the remote control line to power on, release the remote control to start timing, and automatically disconnect the line after 5 seconds, 10 seconds, 15 seconds, 20 seconds (4th gear);
[The function of turning on the lights for incoming calls]That is, the whole line automatically pulls in after power is supplied, also known as the function of turning on the lights for incoming calls.
Package Included:
1 x 433Mhz Receiver Module£¬
1 x Feel free to stick the remote control
(optional)
Notes:
Precautions:
1. Do not operate with power on, you should turn off the power first to operate, and use it after the test is confirmed.
2. When the voltage of the remote control is insufficient, please replace the battery in time (when the voltage of the remote control battery is insufficient, the general remote control distance becomes closer).
![](https://ae01.alicdn.com/kf/S67560c4b27cd4d229993298651f6e0961.jpg)
![](https://ae01.alicdn.com/kf/Se8188ec3c5264d46afe201a7c994bac6j.jpg)
![](https://ae01.alicdn.com/kf/S64f7ee4232174d4db7c1953618df0945j.jpg)
![](https://ae01.alicdn.com/kf/S92cc6bc06dcb4537a89c8b9f7a6ec4edC.jpg)
![](https://ae01.alicdn.com/kf/S9e0a02cbeb974d8f99801e58204ca413p.jpg)
![](https://ae01.alicdn.com/kf/S29b3a80325984a159294de7e029fb782z.jpg)
![](https://ae01.alicdn.com/kf/Sfa0e8a63db8943ce9bdae530c6981108h.jpg)
![](https://ae01.alicdn.com/kf/S83c26320467a47b69a378037a35d540au.jpg)
![](https://ae01.alicdn.com/kf/S503991402a29472bb617199d56983469y.jpg)
![](https://ae01.alicdn.com/kf/S1edd96ff28f54f8989778c876a5ea5469.jpg)
How to use the 433Mhz Switch£¿
About working mode:
Momentary: Press the remote control button, the relay connects, release the remote control button, the relay connection.
Switching: Press once the remote control button, the relay connects, press the remote control button twice, the relay contact.
Interlock: Press the remote control button A, the relay connects, press the remote control button B, the contact relay.
Time delay mode: Press the remote control button, the relay connects, when release the remote control button, after 5s or 10s or 15s or 20s, the relay disconnects automatically.
Auto power on when power on: when power supply, the relay connects.
Code cleanup:
Press the learning button on the receivers 9 times until the LED indicator turns off and then flashes until it flashes 5 times. This means that the code was successfully cleared;
After clearing the code, all remote control can no longer work.
Code learning: (instant)
Press the learning button on the receiver once, it comes into instant setting mode.
Wait for a moment, the LED indicator will turn on, it will enter the learning state.
Press the remote control button, the LED indicator on the receiver board will flash 3 times and then turn off,
Training successful.
Code study: (switching - load on/off, normal switch)
Press the learning button on the receiver twice, it comes into switching mode
Wait for a moment, the LED indicator will turn on, it will enter the learning state.
Press the remote control button, the LED indicator on the receiver board will flash 3 times and then turn off,
Training successful.
Exploring code: (fix)
Note: When you choose lock mode, in order to learn more remote control, you need to learn two different buttons, the first time learned for "ON", the second time learned for "OFF".
For example: Button A = ON, Button B = OFF
Press the learning button on the receiver three times, it enters into latching mode.
Please wait a moment, the LED indicator on the receiver board will be on,
Press the remote control button A,
LED flashlight 3 times.
Press the remote control button B.
LED indicator flashes 3 times and then turns off,
Training successful.
A = ON , B = OFF.
Learn code: (time delay mode)
Press the learning button on the receiver forward time, time for 5 seconds.
Press the learning key on the receiver for the fifth time, delay time for 10 seconds.
Press the learning key on the receiver for the sixth time, delay time for 15 seconds.
Press the learning button on the receiver seven times, delay time for 20 seconds. The LED indicator will be on. Press the remote control button, the LED indicator flashes 3 times and then turns off, learning successfully.
Learning code: (auto-on when turned on)
Press the learning button on the receiver eight times, it comes into setting mode
Wait for a moment, the LED indicator will turn on, it will enter the learning state.
Press the remote control button, the LED indicator on the receiver board will flash 3 times and then turn off,
Training successful.
Note:
1. The system can store 25 pcs. remote controls, if the remote receive more than 25pcs, the original remote control will be lost.
2. When you receive our products, it may be installed one remote randomly, because each product has been tested before it can be arranged for shipment. Therefore, please delete the existing data for the first use.
3. After deleting the data, all remote controls can no longer work.