|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: Woopower
- ±Ù¿ø: CN (Á¤Ç°)
- Ç°¸ñ À¯Çü: RGB ÄÁÆ®·Ñ·¯
- Àç·á: Plastic
- º¸Áõ: None
- Àü¿ø: DC
- ¿ÍÆ®: 350W
- Àü¾Ð: 12-24v
- ¿ø°Å¸®: 3m
- Ư¡: Dimming
- ÃÖ´ë ºÎÇÏ Àü·Â: 350W
Features:
Four Gears: Short press the switch once to adjust the LED speed, there are four gears in total. The speed adjustment is 100% 75% 50% 25%, the darker the red light, the faster the speed, and the brighter the red light, the slower the speed.
Step Number Setting: Press and hold the switch for 5 seconds to enter the step number setting mode. Short press the switch once to set the first stair, short press the switch twice to set the second stair, and so on. The controller has a corresponding blue indicator light for steps, and the blue indicator lights up every time a step is set. After the above operations are completed, press and hold again for 5 seconds to automatically save the corresponding settings.
3 Modes: Stair sensor have three working modes: photoelectric sensor, the light is on when people come, and the light is off when people leave.
Smart Sensor Head: Equipped with smart sensor head, the sensing distance is 1-3 meters, and the sensing angle is 120 degree.
Compact Size: The size of stair sensor about 185x78x25mm/7.28x3.07x0.98inch, voltage: dc12-24v, power: ¡Â350w max, sensor port :2 pcs (ab), port: 32 groups (1234...).
Specifications:
Type: Stair Sensor
Material: Plastic
Color: As Picture
Size: About
Stair Sensor(L*W*H):?185x78x25mm/7.28x3.07x0.98inch
Sensor Head(W*H): 26x19.6mm/1.02x0.77inch
Voltage: DC12-24V
Power: ¡Â350W Max
Sensor Port :2 PCS (AB)
Port: 32 Groups (1234...)
Installation Tips:
1. When the light is inserted into the controller, it must be inserted into the corresponding serial number jack
2. The controller and sensor can be put in the electric box
3. Be sure to connect the positive and negative poles, red is the positive pole and blue is the negative pole. Connect the low-voltage DC 12-24V, and do not directly connect the AC 220V.
4. It is recommended to bury the lines in advance, and wait until the stairs are decorated and the lights can be installed.
5. One sensor is at the head of the stairs and the other is at the end of the stairs
Package included:
1pc x Stair Sensor
1pc x Manual
1pc x Mini Screwdriver
Note:
1. Due to the light and screen difference, the item`s color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
|
|
|
|
|