1.Parameter With solar charging, it is no need for arranging wires. The working life is long and it is no need to replace batteries; it is
suitable for outdoor fence wall lamp and garden fence lamp.
2.The product passed the CE,ROHS,FCC Certification.
3.Good water-proof for all weather usage outside; the concealed wall-mounting design contributes to convenient installation
and fashionable appearance.
Light control function
1.Light source:SMD2835*9LED 100LM
2.Solar plate:poly-silicon 2V/250mA
3.Waterproof:Ip55
4.Material:ABS,acrylic
5.Charge time:6~8H
6.Using time:>8H
7.Accumulator:Ni-MH/AA/1.2V*1600mA
Installation and Operation Instructions (attached figure)
LInstall the plastic lamp cover on the lamp body(as figure step 1)
2.Leave the switch to "ON"position,place the solar light under the direct sunlight to be full charged (about 8-12hours)
before you install it for use
3.Take out the expansion particle in the installation package, hit it into the per-drilled hole in the wall ,lock the product in the wall
with screw though the screw holes in the product with a screw driver, if the mounting surface is wooden, the expansion particie
is no necessary.(as figure A & B)
4Inset the mounting bracket into mounting slot in the lamp, and then with racket sharp screw to securely fix the bracket in the
the gutter or fence (as figure C&D)
5After the installation,the product turns into automatically light-operated mode. In the daytime, it turns off and charges
automatically; in the nights, it turns on automatically.
Product Description Details
Components:
¨éLong Mounting Bracket (1 Pc)
¨îLED Lights(9pcs)
¨è Short Mounting Bracket (1pc)
¨ïBattery Compartment
¨éMounting Slot (insertion Bracket)
¨ð Solar Panel
¨êScrew Hole For Flush Mounting
¨ñ Solar Lamp Body
¨ëPlastic Lamp Cover
@Installation Package:
a:Expansion particle 2pcs
¨ìRechargeable Battery(1pc)
b:Ø3*14mm tapping screws 2pcs
¨íON-OFF Switch
c:Ø2*6mm tapping screws 1pc
d:Ø5*6mm machine screws 1pc
e:Ø5*25mm racket screws 1pc
Attention
1.Please keep the surface of solar panel clean ,to make sure the solar panel absorb sunlight effectively
2.Far from fire source , otherwise the accumulator may be explosive.
3.Please take out the battery if you plan to stop using the product for a long time,and charge the battery every 3 months,otherwise
accumulator life performance would be effected adversely.
4.Avoid usage in high temperature,humidity and corrosive environment ,otherwise parts may be damaged.
5. Install the solar product in an area where it can get direct sunlight.
6. Select an outdoor location away from other light source at night such as street lights. It may cause the product not to
turn on automatically at night.
7. Duration of light depends on solar product` s level of sunshine exposure,geographical locations,weather conditions
and the hours of daylight.